I have seen two mentions of "-nosplash"
I do not know how to use the Command Line. Also I do not open MW from a short cut.
I use a programmable keyboard where I have entered the path to mailwasher.exe
i.e. "C:\Program Files (x86)\FireTrust\MailWasher\MailWasherPro.exe"
I should be grateful for a simple instruction. Of course, it would be easy if there was a box to untick in 'Settings'.
How to Remove Splash Screen
- michaelkenward
- Guardian Gecko
- Location: West Sussex
Post
Re: How to Remove Splash Screen
If the keyboard shortcut allows it, the way to use switches is:
"C:\Program Files (x86)\FireTrust\MailWasher\MailWasherPro.exe" -nosplash
Seems to work for MW2010. It was something I was thinking of looking into earlier. Thanks for the pointer.
"C:\Program Files (x86)\FireTrust\MailWasher\MailWasherPro.exe" -nosplash
Seems to work for MW2010. It was something I was thinking of looking into earlier. Thanks for the pointer.
MK
MW Pro 7.5.0 Lifetime licence.
Android 1.4 on Asus Nexus 7 and LG Nexus 4
Windows 10 64-bit + Asus Z-170-K + Intel i5-6500 + 512GB Samsung SM951 M.2 PCI-e AHCI SSD + Corsair 16GB DDR4 Red Vengeance LPX 2400MHz Memory
MW Pro 7.5.0 Lifetime licence.
Android 1.4 on Asus Nexus 7 and LG Nexus 4
Windows 10 64-bit + Asus Z-170-K + Intel i5-6500 + 512GB Samsung SM951 M.2 PCI-e AHCI SSD + Corsair 16GB DDR4 Red Vengeance LPX 2400MHz Memory
- Sidewinder
- Weary Womble
Post
"C:\Program Files (x86)\FireTrust\MailWasher\MailWasherPro.exe" -nosplash
Re: How to Remove Splash Screen
Corrected (My Bad added the space where needed):pegasus44 wrote:I have seen two mentions of "-nosplash"
I do not know how to use the Command Line. Also I do not open MW from a short cut.
I use a programmable keyboard where I have entered the path to mailwasher.exe
i.e. "C:\Program Files (x86)\FireTrust\MailWasher\MailWasherPro.exe"
I should be grateful for a simple instruction. Of course, it would be easy if there was a box to untick in 'Settings'.
"C:\Program Files (x86)\FireTrust\MailWasher\MailWasherPro.exe" -nosplash
Last edited by Sidewinder on Sat Aug 07, 2010 8:16 am, edited 2 times in total.
I am not a Firetrust employee. Just a MW User & Volunteer BETA Tester.
Remember "FREEDOM IS NEVER FREE" U.S.N.
DT W7 64 HP SP1 16GB Ram - LT W7 32 HP SP1 4GB Ram - iPad4 64 GB Ram WiFi/Cellular IOS 9.3 Beta 3
Remember "FREEDOM IS NEVER FREE" U.S.N.
DT W7 64 HP SP1 16GB Ram - LT W7 32 HP SP1 4GB Ram - iPad4 64 GB Ram WiFi/Cellular IOS 9.3 Beta 3
- michaelkenward
- Guardian Gecko
- Location: West Sussex
Post
The quotes have to be in the right place.
You need them because there are spaces in the path. In this case in "Program Files (x86)".
In essence, the quotes say "Here is the program".
Including the switch inside the quotes can break the command.
Re: How to Remove Splash Screen
This may work, the one I offered definitely works. I tried it.Sidewinder wrote: "C:\Program Files (x86)\FireTrust\MailWasher\MailWasherPro.exe-nosplash"
The quotes have to be in the right place.
You need them because there are spaces in the path. In this case in "Program Files (x86)".
In essence, the quotes say "Here is the program".
Including the switch inside the quotes can break the command.
MK
MW Pro 7.5.0 Lifetime licence.
Android 1.4 on Asus Nexus 7 and LG Nexus 4
Windows 10 64-bit + Asus Z-170-K + Intel i5-6500 + 512GB Samsung SM951 M.2 PCI-e AHCI SSD + Corsair 16GB DDR4 Red Vengeance LPX 2400MHz Memory
MW Pro 7.5.0 Lifetime licence.
Android 1.4 on Asus Nexus 7 and LG Nexus 4
Windows 10 64-bit + Asus Z-170-K + Intel i5-6500 + 512GB Samsung SM951 M.2 PCI-e AHCI SSD + Corsair 16GB DDR4 Red Vengeance LPX 2400MHz Memory
- pegasus44
- Rattled Rabbit
- Location: Javea, Spain
Post
Thank you both for your prompt replies.
When a switch is required again I may be able to implement it.
Re: How to Remove Splash Screen
This worked perfectly. I noted the leading space before -nosplashmichaelkenward wrote:If the keyboard shortcut allows it, the way to use switches is:
"C:\Program Files (x86)\FireTrust\MailWasher\MailWasherPro.exe" -nosplash
Seems to work for MW2010. It was something I was thinking of looking into earlier. Thanks for the pointer.
Since the first attempt was functional I did not try without the leading space.Sidewinder wrote:Corrected:pegasus44 wrote:I have seen two mentions of "-nosplash"
I do not know how to use the Command Line. Also I do not open MW from a short cut.
I use a programmable keyboard where I have entered the path to mailwasher.exe
i.e. "C:\Program Files (x86)\FireTrust\MailWasher\MailWasherPro.exe"
I should be grateful for a simple instruction. Of course, it would be easy if there was a box to untick in 'Settings'.
"C:\Program Files (x86)\FireTrust\MailWasher\MailWasherPro.exe"-nosplash
Thank you both for your prompt replies.
When a switch is required again I may be able to implement it.